Steel Grating Using Samples

Steel grating has many advantages such as light weight, great load-bearing capacity, non-slip and safe, easy installation, being economical of materials, being sturdy and durable, ventilation, easy to clean and attractive appearance.

Steel grating are widely used by various plants such as electric power, petroleum, chemical industry, metallurgy industry, machinery industry, shipbuilding, harbor, oceanographic engineering, building, paper mills, cement plant, medicine, spinning and weaving, foodstuff factory, transportation, municipal administration, parking lot, etc.

The steel gratings may be applied to make platform, floor, walkway, stair treads, trestle, fending, drainage trench cover, pit cover, suspended ceiling, ventilates and light through facility, etc.

Grating for operating gangways

Mech Pitch: 33 × 33 mm.
Load bearing bar size 30 × 5 mm.
Transverse Bar Size: Diameter 5 mm (support bar).
Binding bar size 30 × 5 mm.
Protection: All surfaces to be made free from rust & scale by chemical cleaning.
Panting: apply coat of suitable bituminous paint by dipping dry film 60 micron.

Grating size 1000 × 1000 × 30 mm

Grating size 1250 × 1000 × 30 mm

Grating size 1300 × 1000 × 30 mm

Grating size 1500 × 1000 × 30 mm

Grating size 2000 × 1000 × 30 mm

Grating for operating Floors

Mech Pitch: 33 × 33 mm.
Load bearing bar size 40 × 5 mm.
Transverse Bar Size: Diameter 5 mm (support bar).
Binding bar size: 40 × 5 mm.
Protection: All surfaces to be made free from rust & scale by chemical cleaning
Panting : apply coat of suitable bituminous paint by dipping dry film 60 micron.

Grating size 700 × 1000 × 40 mm

Grating size 800 × 1000 × 40 mm

Grating size 1300 × 1000 × 40 mm

Steps for stair ways

Mech Pitch: 33 × 33 mm.
Load bearing bar size: 30 × 5 mm.
Transverse Bar Size: Diameter 5 mm (support bar).
Side plates size: 70 × 5 mm.
Front edge protected: by 30 × 30 mm slotted angle.
Protection: All surfaces to be made free from rust & scale by chemical cleaning Panting: apply coat of suitable bituminous paint by dipping dry film 60 micron.